Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
The Complete Rundown of Sex Dolls Today- What You Need to Know
#1
[center][Image: nfaoxus406adxw2wnv657-1.jpg][/center]

[center]DISCOVER THE BEST SEX DOLL FEET ADVICE NOW[/center]

Sex Doll Feet Explained: Standing Feet Vs Non-Standing Feet
Standing feet are the sort of feature people ignore until they need them; after that, they find the difference immense. Don't let the spec sheet fool you; this small detail changes what you can do with the doll, how she stores, how she photographs, and how she wears over time. Understanding the difference before you order is one of the simplest ways to stay away from a frustrating purchase.

Why Non-Standing Dolls Can Only Sit or Lie Down
At its most basic, the difference is uncomplicated. What lets the doll stand upright without support is the metal bolts embedded in the soles of standing feet. Damage to the feet is the result of trying to stand a doll with non-standing feet, which don't have these bolts and so only permit sitting or lying down. Key to it all are the bolts; everything else follows from whether they're present.

What Non-Standing Feet Can't Do
Standing feet are what photography and display depend on. Full-length poses without evident supports, and display anywhere that needs her to be upright, such as a corner or doorway, are open to a doll that can stand unaided. This opens up a wide range of poses and settings that aren't possible with non-standing feet, and it's the main reason most photographers specify standing feet when ordering.

Standing Feet Are Also Essential for Showers
If you want shower use, standing feet are important as well. Showering with your doll needs her to stand; the alternative, lying her down in a shower, is both impractical and dangerous. Her stability in a wet environment is down to the standing feet, and the metal bolts keep the feet from absorbing water the way non-standing feet would. Structural failure finally, and rust, can come from water absorption in non-standing feet; that's why this is a real safety consideration.

Weeks or Months Before the Damage Shows
The shower use point is worth expanding, because it's the source of a lot of damaged dolls. The ankle of a non-standing foot contains foam or filler material, which absorbs water when it gets wet. The metal skeleton inside the leg is then rusted by the water, which takes weeks or months to become visible but is fundamentally unfixable once it starts. Nonetheless attentive you are, keep a doll with non-standing feet out of the shower, because the water will find its way in anyway of your precautions.

Upright in a Corner, Wardrobe or Cabinet
Another upside of standing feet is easier storage in some setups. With standing feet she can be stored upright in a corner, a wardrobe or a storage cabinet, without the need for a hanging hook or a storage case. Display rather than hiding her away is something this suits well, and it's space-efficient for buyers who don't have room for a hanging setup. Preferred by some customers is the visible and accessible storage that standing feet make possible.

What Standing Feet Cost
It's a downside that standing feet are marginally more expensive and marginally heavier. You'll typically pay a few percent more than for non-standing feet, because the metal bolts add a small quantity of weight and manufacturing is more involved. The difference is small, generally worth the additional cost, and worth knowing about if you're buying on an extremely tight budget.

Bolts Showing When the Feet Are Bare
A further downside is the bolts becoming noticeable if the feet are bare. Photos of a doll in high-heeled shoes or open-toed footwear might show the bolts, which some customers find distracting. Steering clear of standing feet completely over this would be unnecessary; it's a small aesthetic issue that closed shoes, or footwear that hides the bolts, will solve.

Know What You Want
You don't need standing feet if you only want to use the doll in bed and don't plan to display her standing or shower with her; non-standing feet are cheaper and lighter. Save on the feet, spend on articulated hands or a better wig; non-standing feet are perfectly sufficient when the doll will largely be in a bed or on a sofa. A totally valid choice, this, for buyers who know what they want.

Softness as a Selling Point
Non-standing feet are slightly softer and more pliable, and some purchasers find them more comfortable to touch as a result. If you're specifically looking for maximum softness it's worth knowing about, even though this is a subtle difference that's not ordinarily enough to justify the choice on its own. The feet of non-standing dolls feel more like the rest of her and less as if there's a hard core inside.

A Doll That Can No Longer Stand
The large risk? Customers forget what kind of feet they have and try to stand the doll regardless. Expect genuine damage from this widespread slip-up, because the foam inside the ankle can't support the doll's weight and will tear or collapse. A doll that can no longer stand, even if you attempt to support her, is the result, because the feet have been permanently damaged. Resist the temptation to test the limits of non-standing feet, and remember that they're non-standing, if you're purchasing them.

Adding Bolts Afterwards
Whether standing feet can be retrofitted to a doll that doesn't have them is another question. The short answer is no, not readily. The bolts are embedded in the soles during manufacturing, and adding them subsequently requires cutting into the feet and installing new hardware, which is expensive and frequently doesn't work as well as the original. Acquire a doll with standing feet in the first place, rather than attempting to add them later, if you're considering a doll without them and think you might want them later.

Standing Feet Don't Limit What You Can Do
The useful advice on picking between standing and non-standing feet is direct. Photographing the doll, displaying her standing, or using her in the shower? Then you need standing feet. Perfectly acceptable are non-standing feet when you only want to use her in bed or on a sofa and you don't care about display. The safer choose when you're undecided is standing feet; they limit nothing, and the small extra cost is worth it.

Male Dolls Benefit More From Standing Feet
We should mention a gender consideration as well. Because male dolls are heavier and more tough to store in any other way, they ordinarily get more from standing feet than female dolls do. More space and pressure on the body are what a 45kg male doll that can't stand costs you, as he has to be stored lying down. A real benefit for purchasers who don't have a lot of room is that standing feet give male dolls the ability to store upright.

Visible Hardness at the Bottom
The aesthetic difference between standing and non-standing feet is worth a final note. The bolts make standing feet marginally harder at the bottom, and this can be evident when the doll is barefoot. Dolls with fragile features notably suffer, some customers feel, because the hard soles look a little industrial and less aesthetically satisfying. Some customers prefer the softer, more natural look of non-standing feet. This trade-off only matters when you're photographing the doll barefoot, so factor it into your decision if barefoot photos are a priority.

No Hardware to Come Loose
There's also a maintenance angle that's worth considering. Secure bolts matter: loose ones can damage the foot or the ankle, a bolt that falls out can cause a collapse, and so standing feet need periodic checking. Check every few months, by gently twisting the bolts, and tighten with the suitable tool whichever feel loose. Non-standing feet escape this issue because there's no hardware to come loose, which makes them slightly lower-maintenance long term.

Hard Flooring Can Be Slippery
Different surfaces mean different standing behaviour, and the bolts influence it. Stable on carpet, the doll advantages from bolts that grip well. The doll may need extra support to stay upright when the bolts slip on hard flooring, particularly a smooth floor. Sliding is stopped on a hard surface by a small mat or a grippy pad under the feet, which you should consider. Non-standing feet don't have this issue, because the doll isn't standing in the first place, but if you're planning to display a doll with standing feet on a hard floor, this is worth knowing about.

Bolts Add a Little Length to the Foot
A final, frequently overlooked, consideration is the effect of standing feet on the doll's overall proportions. The bolts add a small amount of length to the foot, which can a little change the way the doll looks in barefoot photos. If you care about exact proportions and plan to photograph the doll barefoot, this subtle effect, generally invisible in shoes, is worth knowing about. No bolts means no such effect with non-standing feet, whose feet are slightly shorter and more natural-looking.

Final Verdict on Feet
Choices for posing, display, storage and the shower are opened up by standing feet, which non-standing feet can't match, making them worth the additional cost for most buyers. Customers who are sure the doll will only be used in bed, and won't be displayed or photographed standing, are the only ones who should skip them. The better choice for everyone else is standing feet, one of the simplest upgrades to justify. More info at this An Honest Guide to Sex Dolls Today- What You Need to Know bffd893 bearing in mind A Straight-Up Look at Sex Dolls Right Now- Start Here and The Ultimate Deep Dive Into Sex Dolls Today- The Truth. Also check out my site together with navigate to this website not to mention dig this as well as this post as well as have a look at this website not forgetting sites such as website link and don't forget recommended you read together with click to find out more on top of home page and source material here for more.
[center][Image: lwje3h40r9td4hani42wf.jpg][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)