06-22-2025, 09:12 PM
Portable balancer & Vibration analyzer Balanset-1A
Description:
![[Image: 77-e1693745667801.jpg.webp]](https://vibromera.eu/wp-content/uploads/2023/09/77-e1693745667801.jpg.webp)
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
Balanset-1A Device Description
The Balanset-1A is a compact, dual-channel solution for balancing and vibration analysis of rotating mechanisms, including crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotary equipment.
Key Features and Capabilities
Vibrometer Function
Tachometer: Accurate measurement of rotational speed (RPM).
Phase: Measures the phase angle of vibration signals for detailed analysis.
1x Vibration: Analyzes and measures the primary frequency component.
FFT Spectrum: Detailed analysis of the vibration signal's frequency spectrum.
Overall Vibration: Monitoring the total vibration level.
Measurement Log: Archives data for future analysis.
Rotor Balancing Mode
Single-Plane Balancing: Balances rotors in one plane to minimize vibration.
Two-Plane Balancing: Balances rotors dynamically in two planes.
Polar Diagram: Displays imbalance on a polar diagram for accurate weight placement.
Last Session Recovery: Allows resuming the previous balancing session.
Tolerance Calculator (ISO 1940): Calculates allowable imbalance according to ISO 1940 standards.
Grinding Wheel Balancing: Utilizes three counterweights to balance grinding wheels.
Charts and Graphs
Overall Graphs: Visualizes overall vibration levels.
1x Graphs: Shows vibration characteristics at the primary frequency.
Harmonic Graphs: Shows the influence of harmonic frequencies.
Spectral Graphs: Graphically shows the frequency spectrum for in-depth analysis.
Additional Capabilities
Archive: Store and revisit past balancing data.
Reports: Automatically generate detailed balancing reports.
Rebalancing: Facilitates rebalancing with previously saved data.
Serial Production Balancing: Suitable for balancing rotors during serial production.
In the Box
Balanset-1A is supplied with:
A measurement block with an interface.
Two vibration measurement sensors.
Laser tachometer with magnetic mount.
Digital weighing scales.
Software (Note: Laptop not included, available as an additional order).
Protective transport case.
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
Description:
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
Balanset-1A Device Description
The Balanset-1A is a compact, dual-channel solution for balancing and vibration analysis of rotating mechanisms, including crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotary equipment.
Key Features and Capabilities
Vibrometer Function
Tachometer: Accurate measurement of rotational speed (RPM).
Phase: Measures the phase angle of vibration signals for detailed analysis.
1x Vibration: Analyzes and measures the primary frequency component.
FFT Spectrum: Detailed analysis of the vibration signal's frequency spectrum.
Overall Vibration: Monitoring the total vibration level.
Measurement Log: Archives data for future analysis.
Rotor Balancing Mode
Single-Plane Balancing: Balances rotors in one plane to minimize vibration.
Two-Plane Balancing: Balances rotors dynamically in two planes.
Polar Diagram: Displays imbalance on a polar diagram for accurate weight placement.
Last Session Recovery: Allows resuming the previous balancing session.
Tolerance Calculator (ISO 1940): Calculates allowable imbalance according to ISO 1940 standards.
Grinding Wheel Balancing: Utilizes three counterweights to balance grinding wheels.
Charts and Graphs
Overall Graphs: Visualizes overall vibration levels.
1x Graphs: Shows vibration characteristics at the primary frequency.
Harmonic Graphs: Shows the influence of harmonic frequencies.
Spectral Graphs: Graphically shows the frequency spectrum for in-depth analysis.
Additional Capabilities
Archive: Store and revisit past balancing data.
Reports: Automatically generate detailed balancing reports.
Rebalancing: Facilitates rebalancing with previously saved data.
Serial Production Balancing: Suitable for balancing rotors during serial production.
In the Box
Balanset-1A is supplied with:
A measurement block with an interface.
Two vibration measurement sensors.
Laser tachometer with magnetic mount.
Digital weighing scales.
Software (Note: Laptop not included, available as an additional order).
Protective transport case.
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
[url=https://allegro.pl/oferta/balanser-dynamiczny-balanset-1a-oem-set-16713019136] Order on Allegro